Basic Info.
Operational Method
Manual
Rated Temperature
High Temperature
Origin
Suzhou City, China
Product Description
Specification
1. Intelligent temp controlling system. Its temp can be adjusted according to the heat resistance of screen meshWhen the room temp is 77° F (25° C), its highest temp can reach 172° F (78° C).
2. The inside installed axial flow fan makes the hot air in circulation, which guarantees an equal temp in cabinet and can improve drying efficiency. Meanwhile. The axial flow fan (specially used for large computer equipment) can normally be used for about 20, 000 hours. It usually takes 2-4 minutes to well dry the screens coated with the photosensitive emulsion.
3. It adopts hierarchical (100 levels) temp-adjusting system; Users can adjust temp according to ambient temperature and different materials. It can operate according to your set temp next time because of its automatic memorizing function.
4. It is wholly coated without corrosion and dandification. The drawer type is flexible but perfect tight. All kinds of screens can be placed and moved flatly with printed side up to guarantee the adhesive layer smooth.
5. The unitary brand-new double heating chip plate is low power but high heating efficiency. It guarantees the inner temp of each floor more even and accurate.
Operation Instruction
1. Turn on the switch; Then the machine will indicate "F000" and the air fan works automatically.
2. Press "+" until to "F070'
3. Place thermometer probe on the third drawer; Check the temp after five minutes.
4. If the temp is not right in your need, you can press "+" or "-" to increase or reduce 10 grades; Awaiting five minutes then check the temp.
5. After adjusting the available temp, the machine will automatically save and memory your set data.
6. It is normal that the "F" or "O" displays alternately when the machine is working.
Reference data
When the room temperature is 77° F (25° C), close and seal all drawers, ten minutes later after you have set, the temp indicates —
1. Set "F050", the temp is about 93° F (34° C)
2. Set "F060", the temp is about 104° F (40° C)
3. Set "F070", the temp is about 115° F (46° C)
4. Set "F080", the temp is about 126° F (52° C)
5. Set "F090", the temp is about 140° F (60° C)
6. Set "F100", the temp is about 167° F (75° C)
Tips
1. According to the heat resistant temperature of silk screen, the highest temperature of this machine is 172° F (78° C).
2. Under normal conditions, 149° F (65° C) is appropriate for drying screen mesh.
3. It will indicate the last set parameters while used again because of its automatic data memorizing functions of the equipped intelligent temp controlling system.
4. Reference date: When the temperature is 149° F (65° C), drying the screen coated with our photosensitive emulsion for only one layer takes about 2mins. Drying screen without photosensitive emulsion takes about 1min. Please take it in reference while using.
Feature
1. According to the withstand temperature of silk screen. The highest temperature of this machine is 70° C(158° F). While adjusting the temperature, if the temperature is over 158° For70° C, the meter can only indicate158° For70° C.
2. Under normal conditions, set a temperature of 65C (149F) is appropriate.
3. The real temperature may have 30-35° F(2-3° C) difference in temperature because of opening or closing the drawer or indoor temperature during the course of actual operation, which is normal and not influence using.
4. This machine with this meter will indicate the last set when it is used again.
5. Reference date: When the temperature is 65° C(149° F), the time of drying single floor of photosensitive emulsion of our company is 2mins. And drying plate without photosensitive emulsion needs 1min. Please refer to it while using.
Address:
No. 248, Jinshan Road, Newly Develop Area, Suzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Apparel & Accessories, Arts & Crafts, Bags, Cases & Boxes, Chemicals, Consumer Electronics, Manufacturing & Processing Machinery, Textile
Company Introduction:
Established in 2006, Suzhou Cleanway Precision Machine Co., Ltd. is located in Suzhou, East China. Our company has quickly become a professional supplier and exporter of heat press and screen printing systems in China. We coordinate with other excellent suppliers at home and abroad and set up the systematic global marketing lines in more than 20 countries and regions.
Our main pneumatic and electrical components are made in Europe or Taiwan. As a guarantee of our quality, all of the products are under the strict control and comply with CE certificate before shipment.
Our full sets of printing systems are widely used in a wide range of industries, such as graphic medium printing, electronic unit printing, promotional products printing, textile screen printing, plastic product printing, packing printing, advertising printing and other industrial printing.
We will be your best printing system partner in China. We hope to cooperate with you.